Tutorial Load Balancing 2 Line speedy

sory gambarnya beda ma tutorialnya he,he,he maklum gambar cuma copas doang,,,

Seeting Load balancing 2 Line Speedy dengan Mikrotik, dan Modem di posisikan sebagain bridging.

langsung aja ke step2 nya setting dulu modem sebagai berikut:

- Setting modem Speedy1

• Ip Address : 192.168.1.2, Subnet : 255.255.255.0 Fitru DHCP pada interface LAN di Non aktifkan, Mode sebagai Bridge

- Setting Modem Speedy2

• Ip address : 192.168.2.2, Subnet : 255.255.255.0 Fitru DHCP pada interface LAN di non aktifkan, Modem sebagai Bridge

Login ke Mikrotik dan atur sebagai berikut :

contohnya buat mikrotik versi 3.xx (saya pakai di mikrotik OS bawaan RB450G) :

Ip Ke modem1 : 192.168.1.1 interface=speedy1 IP Ke Modem2 : 192.168.2.1 interface=speedy2 IP Local : 192.168.3.1 interface=Local Setting Buat Mangle

/ip firewall mangle add chain=prerouting action=mark-connection new-connection-mark=master1 \ passthrough=yes connection-state=new in-interface=Local nth=2,1 \ comment=”" disabled=no add chain=prerouting action=mark-routing new-routing-mark=master1 passthrough=no \ in-interface=local connection-mark=master1 comment=”" disabled=no add chain=prerouting action=mark-connection new-connection-mark=master2 \ passthrough=yes connection-state=new in-interface=Local nth=1,1 \ comment=”" disabled=no add chain=prerouting action=mark-routing new-routing-mark=master2 passthrough=no \ in-interface=local connection-mark=master2 comment=”" disabled=no

Setting NAT

/ip firewall nat add chain=srcnat action=masquerade out-interface=speedy1 add chain=srcnat action=masquerade out-interface=speedy2 add chain=srcnat action=masquerade src-address=”192.168.3.0/24″

Setting Routenya

/ ip route add dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=255 target-scope=10 \ routing-mark=master1 comment=”" disabled=no add dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=255 target-scope=10 \ routing-mark=master2 comment=”" disabled=no add dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=255 target-scope=10 \ comment=”primary connection” disabled=no

Di test pada RB45G dan Ok.. lumayan

catatan :

untuk getway pada routing : bisa di isi ip getway dari interface ppoe yang di dapat dari telkom.lebih optimal

sumber: ab-intermedia

Posted in: IT